Significations et usages de Diver_rescue

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (September 2009)

Diver rescue, following an accident, is the process of avoiding or limiting further exposure to diving hazards and bringing a diver to safety.^[1] A safe place is often a place where the diver cannot drown, such as a boat or dry land, from which professional medical treatment can be sought. In the context of surface supplied diving, the place of safety for a diver with a decompression obligation is often the diving bell.

Contents 1 Reasons for needing rescue 2 Rescuers and training 3 Rescue activities 3.1 Locating the casualty underwater 3.2 Providing emergency gas 3.3 Freeing the trapped casualty 3.4 Bringing the casualty to the surface 3.4.1 Managing a convulsing casualty 3.5 Making the casualty buoyant on the surface 3.6 Attracting help 3.7 Carrying out artificial ventilation in the water 3.8 Towing the casualty 3.9 Removing the casualty from the water 3.10 Providing first aid 4 Precautions during the rescue 5 See also 6 References 7 External links

  Reasons for needing rescue

There are many reasons why a diver may need rescue, including:

• running out of breathing gas
• inability to access the breathing gas due to an equipment failure
• unconsciousness
• inability to see the depth gauge or diving computer to make a safe ascent, generally because the diving mask is lost, keeps flooding or is damaged
• panic
• incapacitated due to trauma, diving disorder, or medical condition
• becoming lost or trapped underwater
• inability to control buoyancy and/or inability to apply thrust sufficiently to ascend (in Scuba diving without a lifeline)
• inability to return to the shore or a boat after a dive
• hypothermia
• exhaustion

The diver may get into a situation requiring rescue through incompetence, unfitness or bad luck.

  Rescuers and training

In recreational diving, the urgency of the rescue and the remoteness of dive sites mean that professional rescuers rarely take part in diver rescues. Other divers at the scene become rescuers.

As the immediate in-water rescuer is often the diver's own buddy, diver training agencies often teach rescue techniques in intermediate-level diver training courses; examples are the PADI Rescue Diver, the BSAC Sport Diver and the DIRrebreather Rescue courses.

When the rescue involves a group of people, co-ordination is needed to make it quick and effective. This may be carried out by the skipper of the boat, if diving is taking place from a boat, or by a diver. Some training agencies offer courses to prepare divers for such as role, for example BSAC's Practical Rescue Management course.

Professional divers are usually trained in diver rescue for the mode of diving they are certified in as part of the work of a professional diver is as stand-by diver to the working diver. The level and quality of training and required skill for certification may vary depending on the jurisdiction and relevant code of practice. During professional diving operations there will usually be a competent diver on stand-by at the surface control point, or in the water with the working diver, or both. The surface stand-by diver should be ready for immediate deployment for a rescue if this is deemed necessary by the diving supervisor. Appropriate equipment based on the operational hazards and risk should be available on site.

The bellman is the in-water standby diver in wet and dry bell operations.

  Rescue activities

The effort and difficulty of a rescue varies widely and depends on many factors such as the nature of the problem, the underwater conditions and the type and depth of the dive site. A simple rescue could be to tow to safety a diver on the surface who is exhausted or suffering from leg cramps. A complex and high-risk rescue would be to locate, free and bring to the surface a lost diver who is trapped underwater in an enclosed space such as a shipwreck or cave with limited breathing gas supplies.

The sequence of potential activities needed in a generic rescue are:

• if the casualty's position underwater in unknown, locate the casualty and, if possible, mark the position
• if the casualty is low on breathing gas, provide more gas
• if the casualty is trapped, free the casualty
• if the casualty is submerged, bring the casualty to the surface
• if the casualty has a decompression obligation, decompress if safely possible. The rescuer must also take into account his/her personal decompression requirements.
• if the casualty is not buoyant at the surface, make the casualty buoyant
• if help at the surface is available but not at hand, attract help
• if the casualty is not breathing, carry out continuous artificial respiration on the surface
• if the casualty is on the surface in the water and no help is available, tow the casualty to a boat or to land
• if the casualty is beside a boat or the shore, remove the casualty from the water
• if necessary, resuscitate, provide first aid and arrange transport to professional medical help

  Locating the casualty underwater

It may be difficult to locate the diver underwater where dives take place in low visibility conditions, in currents or in enclosed spaces such as caves and shipwrecks or where the diver uses breathing equipment which releases few bubbles, such as a rebreather. Even when open circuit equipment is used it may be difficult to see the bubbles due to surface conditions of wind, waves and spray, fog, or darkness.

Divers often use distance lines, surface marker buoys, diving shots, lightsticks and strobe lights to indicate their position to their surface support team.^[2][3] A standard precaution when entering enclosed spaces is to use a distance line; this marks the exit route, which may be needed after the diver's fins, wash, and bubbles dislodge silt and loose overhead materials such as rust which can reduce visibility to near zero.

Common search techniques such as the circular search or jackstay search, need preparation and practise if they are to be used effectively and safely. The spiral box search and compass grid search require less preparation, but probably greater skill.

Searches of enclosed spaces expose the rescuer to danger. The rescuers may need training and experience in Cave diving or Wreck diving to minimise the risks of that type of rescue.

  Providing emergency gas

Providing emergency gas to a diver who has run out is the highest prioriy after finding the diver. Without breathing gas the diver will die in minutes.

Running out of gas is a major contributor to diving accidents. Many scuba accidents start in some other way and culminate in running out of gas.

The main reasons for running out of gas are:

• failing to monitor consumption of the gas - not watching the contents pressure gauge
• under-estimating the amount of gas needed for the return and ascent and decompression stops
• consuming gas faster than estimated by going too deep, over-exercising or psychological stress
• delayed exit or ascent due to other problems, such as getting lost or entrapped
• equipment failure, such as a frozen first stage or blown o-ring, in the main breathing set leading to escape of gas

Even when the prime cause of an underwater emergency is not running out of gas, lack of gas can easily become another problem for the rescuers to overcome because more gas is consumed during the accident and its aftermath. This could be due to the diver remaining at depth for longer than planned or due to increases in the diver's breathing rate, due to exercising or panic.

Common configurations of diving cylinders and diving regulators used as a backup or reserve for emergencies include:

• an independent set - a complete, backup set such as a "pony" or one half of a “twinset” worn by a diver or a separate set brought down by the rescuer
• an "octopus" - a second, backup demand valve or mouthpiece on a scuba set that is already being used by the diver
• a "spare air" - a small independent set with integrated regulator and mouthpiece

See the diving cylinder and diving regulator articles for more details of the configurations.

There are two main ways of delivering breathing gas to the out-of-air diver;

• provide the casualty with a secondary demand valve, preferably on a long hose, so that rescuer and casualty can breathe simultaneously, and concentrate their efforts on getting to a safer place, or
• share a single demand valve with the casualty by "buddy breathing", which is a more risky procedure, and requires constant attention to breathing by both divers.

The gas capacity of the cylinder is important. Divers breathing at depth consume more gas because the gas must be delivered to them at ambient pressure. At the end of a deep dive they will need more gas to breathe during the longer ascent to the surface and during any decompression stops.

The mixture of the breathing gas is important. Hyperoxic gases cannot be breathed safely below their maximum operating depth because of the risk of oxygen toxicity and hypoxic gas cannot be breathed safely in shallow water because the partial pressure of oxygen falls below that needed to sustain consciousness.

  Freeing the trapped casualty

Divers may become trapped in fishing nets; monofilament is almost invisible underwater. Ropes also are a threat to the diver's safety; normal diving equipment has many inaccessible snag points that can trap the diver, particularly when components are left to dangle, and when clips are used which can hook onto line without active intervention by the diver (known to technical divers as suicide clips). Another problem occurs when divers try to squeeze through small gaps where their bulky equipment can become wedged or caught. Old ferrous shipwrecks can be structurally unstable; they may retain their shape but have lost their strength through corrosion and therefore have components or cargos that have high potential energy due to gravity, and may collapse without warning.

Divers routinely carry a knife, line cutter, scissors or shears to free themselves from ropes, lines and nets. Lifting bags can be used to help move heavy objects underwater, but are not carried as standard equipment by most divers.

  Bringing the casualty to the surface

If a diver is out of gas and is breathing gas supplied by the rescuer, the rescuer and casualty must remain close to one another and ascend together. Starting the ascent may be complicated by the casualty's lack of gas to inflate the buoyancy compensator to become buoyant at the start of the ascent and later, at the surface. At the start of the ascent the casualty may need to fin upwards and keep pace with the rescuer until, with the drop in ambient pressure, the gas already inside buoyancy devices such as the buoyancy compensator or diving suit, expands and provides sufficient buoyancy.

If the casualty is not capable of making an ascent, due to injury or unconsciousness, or the casualty cannot make a safe and controlled ascent, perhaps due to the loss or damage of the diving mask, the rescuer must control the casualty's ascent. This may be done by using the Controlled buoyant lift. As the casualty is totally dependent on the rescuer, it is important if the two were to separate underwater the casualty should continue to ascend to the surface in a failsafe way.

The options, in order of desirability, for making the casualty buoyant include:

• inflate the casualty's buoyancy compensator to lift off the seabed, then vent it to make a controlled ascent.
• inflate the casualty's drysuit, if one is worn, to lift off the seabed, then vent it to make a controlled ascent. A drysuit is a less secure buoyancy device than a buoyancy compensator, and more difficult to inflate if the connected hose has no pressure on it.
• drop the weights from the casualty's diving weighting system. This may result in a dangerous and rapid ascent.
• lift, by finning, the casualty into shallower water where gas in the casualty's buoyancy devices will expand, then vent it to make a controlled ascent.
• It is possible to use the rescuer's buoyancy compensator to lift both divers. A technique for this is taught by some agencies, in which the rescuer holds the casualty with his/her legs wrapped round the torso, freeing the hands for buoyancy control. This technique does not allow the rescuer to provide upward thrust by finning, and all lift must be from buoyancy. A further problem is that if the divers are separated, the rescuer will be positively buoyant, and the victim may well be negative, and sink away before the situation can be corrected.

If the casualty is not breathing, an urgent ascent directly to the surface is needed so that resuscitation can take place there. In this situation and if the rescuer needs to do decompression stops, the rescuer has a dilemma; take the casualty to the surface and increase the risk or severity of decompression sickness, including irreversible injuries or death, or do the stops and risk leaving the casualty to die by asphyxiation or drowning. In these circumstances the value of a surface backup team becomes obvious, as a message or pre-arranged signal to the surface can bring a standby diver down to take over the recovery of the casualty while the initial rescuer attends to his own safety, or the rescuer can send the casualty to the surface by buoyancy, while remaining at the required depth for decompression.

  Managing a convulsing casualty

Convulsions due to acute oxygen toxicity may render a diver unconscious. A common symptom is convulsions similar in appearance to epileptic seizure.^[4]

The US Navy Diving Manual Revision 6 Volume 4 section 17.11.1.4 recommends the following procedure for managing a convulsing casualty at depth. This differs significantly in some details from the procedure recommended by Dr E.D. Thalmann on the DAN website.^[4]

• Assume a position behind the convulsing diver.
• Only release the casualty's weights if progress to the surface is significantly impeded. (Thalmann recommends releasing the weights unless the diver is wearing a dry suit,^[4] as the dry suit without weights may cause the surfaced diver to take a face down position on the surface.)
• Do not ascend in the water until the convulsion subsides (Thalmann makes no recommendation to delay the ascent.^[4])
• Open the victim's airway and leave the mouthpiece in his mouth. If it is not in his mouth, do not attempt to replace it. However ensure that it is switched to "Surface" position in the case of a rebreather, so that the loop does not flood. (Thalman makes no mention of opening the airway, possibly on the assumption that air will escape without this manoeuvre.^[4])
• Grasp the victim round the chest above the UBA or between the UBA and his body. If this is difficult, use the best method possible to obtain control.
• Ventilate the UBA with diluent to lower ppO2 and maintain depth until the convulsion subsides. (This step is significantly omitted by Thalmann.)
• Make a controlled ascent to the first decompression stop, maintaining a slight pressure on the diver's chest to assist exhalation.

• If the diver regains control, continue with appropriate decompression. (omitted by Thalmann)
• If the diver remains incapacitated, surface at a moderate rate, establish an airway and treat for symptomatic decompression. (omitted by Thalmann)

• If additional buoyancy is required, activate the victim's life jacket (inflate BC). The rescuer should not release his own weight belt or inflate his life jacket.
• On reaching the surface, inflate the victim's life jacket if not already done.
• Remove the victim's mouthpiece and (in the case of a rebreather) close the switch the valve to "surface" to prevent the rig from flooding and weighing down the victim.
• Signal for emergency pickup. (Recreational divers may not have this option.)
• Ensure the victim is breathing. Initiate rescue ventilation if necessary.
• If an upward excursion occurred during the actual convulsion, transport to the nearest chamber and have the victim evaluated by an individual trained to recognize and treat diving-related illness.

Thalmann further comments that the decision whether to ascend with a diver who is convulsing is tricky,^[4] and cites the US Navy Diving Manual again, specifically:

• If a diver convulses, the UBA should be vented immediately with a gas of lower oxygen content, if possible. (This is only appropriate with rebreathers, full-face masks with more than one gas supply connected, or with surface supply.)
• If depth control is possible and gas supply is secure (helmet or full face mask), the diver's depth should be kept constant until the convulsion subsides.
• If an ascent takes place it should be done as slowly as possible. (To some extent this is incompatible with the need to get the victim to a place where treatment is possible.)
• If a diver surfaces unconscious because of an oxygen convulsion or to avoid drowning, the diver must be treated as if suffering from arterial gas embolism.

Thalmann further comments^[4] that a full face mask is desirable for use with high oxygen mixes, as it allows the diver to be kept at depth until the convulsion subsides, and that a diver who loses the mouthpiece must be surfaced as he will try to take a breath when the convulsion stops, and on open circuit, that as long as the diver has the mouthpiece in place and is breathing, it should be left until you can get him out of the water, but should be removed on the surface if rescue breathing is necessary and possible. Furthermore, the main goal while the diver is in the water is to prevent drowning and secondarily ensure that the airway is open after the convulsion stops by keeping the neck extended.

  Making the casualty buoyant on the surface

Once the casualty has been brought to the relative safety of the surface, it is important that the casualty does not accidentally sink again. The usual methods of making the diver positively buoyant are to:

• inflate the buoyancy compensator. This is a routine surfacing drill in some training schemes.
• inflate the drysuit, if one is being worn. The gas in a dry suit is not very secure; it can easily escape from seals and vents. Also, excess gas in the suit tends to make the legs buoyant causing the diver mobility problems.
• drop weights.

Divers who are out of air will probably not be able to inflate their buoyancy compensator or drysuit using the normal and simple technique of pressing the direct feed injection valve. If their equipment allows it, and this is anlmost always the case, they may be able to inflate these devices orally or use an integrated gas cylinder (if fitted).

  Attracting help

At this stage in the rescue immediate help is desirable. An immediate call or signal for help may take very little time to get the attention of potential assistance. However if this fails, the survival of the casualty should be attended to, by artificial ventilation if necessary.

Very often, the only people that can provide that help are nearby boat users and people on the shore. Unless the emergency services are very close by or the rescue is beyond the capability of the local rescuers, they will not be on the scene quick enough to be able to provide help. Often with a small group of rescuers the emergency services can only be contacted after the highest priority job of getting the casualty is out of the water has taken place.

Often the rescue can be quickened if a boat can come to the casualty rather than a rescuer having to tow the casualty to safety. Once at the surface, using many rescuers becomes feasible; they can communicate and co-operate to make the rescue more efficient.

Methods of attracting help include shouting, waving a straight arm, flag or surface marker buoy, blowing a whistle, flashing or swinging a torch/flashlight at night, or using a strobe at night.^[2] Cylinder powered, high-pressure gas whistles may be effective even over the sound of engines.^[2]

  Carrying out artificial ventilation in the water

If the casualty is not breathing, it is possible to sustain respiration or even restart it by artificial ventilation (AV) at the surface of the water.

Methods of AV vary depending on diver training organization:

The BSAC technique works like this:

• the casualty and rescuer are buoyant
• the rescuer is positioned at the side of the casualty's head facing the ear
• the rescuer extends the casualty's neck and closes the mouth by lifting the chin with one hand
• the rescuer pushes the casualty's far shoulder upwards with the other hand causing the head to twist towards the rescuer
• the rescuer makes a seal over the casualty's nose using the rescuer's mouth and exhales to fill the casualty's lungs
• the rescuer aims to do 10 inflations per minute if stationary, 2 inflations every 15 seconds if towing

  Towing the casualty

If the casualty is incapacitated or exhausted, help is needed to move the casualty to safety. Towing is time consuming and will exhaust the rescuer, especially in rough water, currents, or if the rescuer is wearing high-drag equipment such as a drysuit or carrying bulky equipment.

It may be possible to avoid a tow by using a boat to pick up the casualty and rescuer. Alternatively, ropes thrown to the rescuer can be used to pull the pair towards safety.

  Removing the casualty from the water

Urgently lifting an injured or incapacitated casualty from the water is a significant problem especially where there are few rescuers, the sea is rough, the boat has high sides or the rescuers on the shore cannot get in or close to the water to help.

Ropes and webbing can be very useful, but some precautions are need:

• avoid looping the rope so that it goes round the chest, preventing breathing, or the neck, causing asphyxia.
• when near boats, keep the minimum rope in the water to prevent fouling propellers
• the minimum safe diameter is 12 mm, 1/2 inch. The rope should be doubled to increase the area of contact and reduce the lifting pressure on the casualty.

"Purbuckling" (or parbuckling) can be used to lift a casualty from the water up a vertical surface such as a high sided boat, pontoon or a jetty. For a 1.5 metre lift, a length of rope of at least 4 metres / 13 feet is needed. The casualty is brought horizontally alongside. A rescuer in the water with the casualty takes the loop of rope under the casualty and passes it back to two rescuers at the top of the vertical face. The loop of rope is positioned so that in passes outside the arms between the shoulder and elbow and around the outside of the legs between the knee and the hip. The two rescuers on land secure the end of the loop that they control by standing heavily on it with one foot. They both pull on the central part of the loop rolling the casualty up the surface taking care to co-ordinate the tension so that the casualty remains horizontal and that the rope remains in position on the casualty's arms and thighs. A rescuer should take care that the casualty's head and neck are not injured during the lift.

An alternative method of lifting the casualty using a rope is to pass the rope under an arm, around the back and under the other arm. The casualty is lifted vertically. There is a risk of spine damage by bending if the casualty is positioned with his or her back to the vertical surface and the rescuers pull the casualty's shoulders in board before lifting the lower end of the torso over top of the vertical surface.

Commercial divers generally wear a safety harness with lifting points, which simplifies the attachment of attachment of equipment for lifting the casualty, and if they are using a lifeline or umbilical, it would be strong enough to lift the diver out of the water.

Recreational and technical diver harnesses are generally unsuited and unsafe for lifting a casualty.

A proper spine board or rescue stretcher is far more suitable, but not often available.

  Providing first aid

If the casualty is not breathing artificial respiration must be provided continuously. It is more likely to succeed if it is started promptly. If the casualty is showing no signs of circulation, chest compression is needed. See main article: cardiopulmonary resuscitation.

If the casualty has injuries the rescuers will need to provide first aid and prepare the casualty to be transported to professional medical help. See main article: first aid.

In the developed world, transporting a diving casualty to hospital or a recompression chamber may be as simple as contacting the marine emergency services, generally by using marine VHF radio, telephone or a distress signal, and arranging a lifeboat or helicopter. If a diving injury such as decompression sickness is suspected, the success of recompression therapy as well as a decrease in the number of recompression treatments required has been shown if first aid oxygen is given within four hours after surfacing.^[5] In other parts of the world and particularly in remote locations, it may be difficult to quickly arrange reliable emergency medical transport and treatment; good insurance and self-reliance are needed.^[6] In-water recompression is a high-risk alternative that may be useful in locations where the casualty would not survive the journey to the nearest recompression chamber due to its distance.^[7][8]

  Precautions during the rescue

Rescuers should not take unacceptable risks; any rescuers who become casualties themselves may jeopardise the rescue of the original casualty particularly as many of the emergency resources available at dive site, such as rescue manpower, first aid oxygen, underwater time and gas are generally in short supply.

Conscious casualties may panic and put the rescuer's safety at risk particularly when the rescuer approaches a casualty in or under the water. It may be possible to avoid contacting a panicked casualty by throwing a rope or buoyancy aid and encouraging the casualty to help him or herself. If contact must be made, the rescuer should try to approach the casualty from a direction that presents least risk to the rescuer, such as from behind. Alternatively, the rescuer may need to wait until the casualty is incapacitated before approaching.

  See also

• Diving hazards and precautions
• resuscitation
• first aid
• oxygen first aid
• artificial respiration
• recompression chamber
• diving cylinder
• diving regulator
• diving equipment
• marine VHF radio
• distress signal
• Emergency position-indicating rescue beacon

  References

  External links

• BSAC Annual Incident Reports
• Rubicon Foundation - Diving Accidents and Fatalities

Underwater diving Types Free-diving Recreational diving Saturation diving Scuba diving Snorkelling Surface supplied diving Underwater diving Specialities Altitude diving Cave diving Decompression diving Deep diving Ice diving Mixed gas diving Rebreather diving Solo diving Sidemount Technical diving Wreck diving Equipment Backplate and wing Buoyancy control device Burst disc Distance line Dive computer Diving equipment Diving regulator Dive reel Diver propulsion vehicle Diving shot Diving suit Fins Mask Moon pool Rebreather Scuba set Snorkel Disciplines Clearance diver Commercial offshore diving Frogman Military diving Police diving Professional diving Scientific diving Underwater photography Underwater videography Hazards Barotrauma Decompression sickness Deep water blackout Drowning Dysbaric osteonecrosis High pressure nervous syndrome Hypercapnia Hypothermia Isobaric counterdiffusion List of diving hazards and precautions List of signs and symptoms of diving disorders Nitrogen narcosis Oxygen toxicity Seasickness Shallow water blackout Silt out Task loading Procedures Buddy diving Decompression (diving) Diver communications Diver rescue Diver training Emergency ascent (diving) Penetration diving Rule of thirds (diving) Scuba gas planning Underwater navigation Underwater searches Underwater search and recovery Related Portal:Underwater diving Dive sites Diver certification agencies Diving chamber Gas blending Human factors in diving safety Hyperbaric medicine Lifting bag Maximum operating depth Military diving units Notable diving researchers Underwater archaeology Underwater vision